Just a heads up:
Gerry Burke, of LLL/NEC fame had some discouraging news
about their ground measurements. He told me that in
some cases there was no configuration of NEC parameters that would
correlate with some real life ground measurements.
The other disclaimer is that NEC only models a uniform ground.
I know my ground is far from that. After 1 to 5 feet of pure
clay, I hit "cemented hardpan" waterproof clay. About 40 feet
down I hit sand, according to the well diggers. No way to
model that with NEC.
Rick N6RK
On 2/13/2021 9:59 AM, Artek Manuals wrote:
HF Ground Measurements at the Lawrence Livermore National Laboratory
Field Site; /Applied Computational Electromagnetic's Society Journal and
News Letter, Vol. 3,Number 2, Fall 1988"
/
Any help appreciated with either a copy of the paper or a pointer to
where it might be downloaded. So far Google has not been my friend./
Dave
NR1DX
manuals@artekmanuals.com
/
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|