Towertalk
[Top] [All Lists]

Re: [TowerTalk] OptiBeam OB2-40M

To: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Subject: Re: [TowerTalk] OptiBeam OB2-40M
From: Michael Tope <W4EF@dellroy.com>
Date: Wed, 19 May 2021 19:13:47 -0700
List-post: <mailto:towertalk@contesting.com>
Yes, I understand the units conversion, Charlie. That's not the problem. Strictly speaking the specification says that the lateral force on the antenna in a 130 km/h wind is 430 newtons (96.6 lbs). Is 130 km/h also the maximum wind survival speed? It doesn't explicitly say that, but it is sort of implied.

73, Mike W4EF.....................

On 5/19/2021 5:07 PM, Charles Morrison wrote:
130kph=80.7mph
for antenna, weather & racecars


On Wed, May 19, 2021 at 7:34 PM Michael Tope <W4EF@dellroy.com <mailto:W4EF@dellroy.com>> wrote:

    One of the radio clubs I belong to is interested in buying an
    OptiBeam
    OB2-40M two-element 40 meter Moxon Yagi. Optibeam is kind of vague on
    wind survival specifications. Their website indicates "Windload at
    130
    km/h           430 N / 0,54 m² / 5,9 feet²". To me that implies the
    antenna is designed to survive 130 km/h winds (80.7 MPH), but it
    doesn't
    actually say that. The antenna is going to be installed at a Southern
    California QTH at a fairly low elevation, so icing is extremely
    unlikely. However, the antenna will be installed on a high narrow
    ridge
    that lend itself to very high uneven (shearing) winds when we get the
    occasional winter storm or Santa Ana wind condition.

    Anyone out there using one of these antennas? I am curious what you
    think of it in terms of performance and reliability?

    Thanks and 73,

    Mike W4EF.................


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>