On 9/6/21 2:26 PM, Richard (Rick) Karlquist wrote:
I did a simulation with EZNEC. Took less than 15 minutes.
10 wavelengths and beyond was far field. At 5 wavelengths,
the signal strength was 15% higher than far field. At 2.5
wavelengths it was 100% higher.
This was for a 4 square transmitting array and a movable
receiving vertical.
73
Rick N6RK
So you set up a "test receiver" vertical, and looked at the current in
the vertical (or in a load resistor)? and then normalized for "distance"?
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|