And they are 7/16" OD - not the most common size in the world, but not
rare either.
When I was still using my R25 & R55 poles, I had many buckets of
galvanized 3/8" and 1/2" bolts, which are the most common size hardware
on cell sites (along with 5/8").
Hence my choice of 3/8" & 1/2" when I drilled out the splice holes.
-Steve K8LX
On 4/5/2022 6:48 PM, Keith Dutson wrote:
I have 32 55G sections that will go up soon. Just went out to look, and
found John is correct; they use the same size bolts for upper and lower holes.
73, Keith NM5G
My Rohn 55g uses six of the same bolts per leg.
John KK9A
A: Rohn never made R-25 with the same size bolt. All Rohn stacked tubular
tower R-35 ( rare Motorola type ) R-45 -R-55 use two diferent size bolts
Why ??????????
Wayne W3EA
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|