Nice job!
John KK9A
David Gilbert ab7e wrote:
If you have access to a 3D printer, or access to somebody who has a 3D
printer, here is an easy way to make your own air wound coils like the
old Air-Dux coils. The video is pretty clumsy, but you should be able
to get the general idea. I recommend clicking on the gear at the lower
right of the video and setting the playback speed to 2x. I'm pretty
slow if I have to think and talk at the same time. ;)
https://youtu.be/qAgF9Mzr8XM
There is a link for the OpenSCAD (free and easy to use open source
modeling software) files in the YouTube description, but here it is as well:
https://www.printables.com/model/371698-air-wound-coil-form
The coil would have looked better if I had let the superglue cure on its
own. Running water over it to speed up the cure made it sort of bubble
up and trashed the appearance.
73,
Dave AB7E
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|