Thanks for the reply David. Reading the Readme file in Brian;s program it
refers to right clicking on a couple variables and running the optimiser. I
am not sure what he is referring to. I can open the program, change
variables and see changes in other parameters but not sure what the
"optimiser" is.
Randy N1KWF
On Sat, Jan 28, 2023 at 1:17 PM David Gilbert <ab7echo@gmail.com> wrote:
>
> Are you asking if my OpenSCAD code pulls variable information from Brian's
> excellent COIL program? If so, the answer is that it doesn't. You can get
> what you want from Brian's program and then load those numbers into the
> OpenSCAD files. Somebody could probably write a script to directly pass
> the variables, but I don't see the point. For one thing Brian's program
> assumes a coil with uniform diameter and the version of my files you are
> referring to results in a slightly tapered coil.
>
> If you're simply asking how to use Brian's program, it's just an
> executable file.
>
> 73,
> Dave AB7E
>
>
>
> On 1/28/2023 7:46 AM, Randy Lake wrote:
>
> Good morning all. How do you access the optimizer in Brian's COIL program
> ?
> Thank you.
> Randy N1KWF
>
>
>
> On Tue, Jan 17, 2023 at 2:13 AM David Gilbert <ab7echo@gmail.com> wrote:
>
>>
>> If you have access to a 3D printer, or access to somebody who has a 3D
>> printer, here is an easy way to make your own air wound coils like the
>> old Air-Dux coils. The video is pretty clumsy, but you should be able
>> to get the general idea. I recommend clicking on the gear at the lower
>> right of the video and setting the playback speed to 2x. I'm pretty
>> slow if I have to think and talk at the same time. ;)
>>
>> https://youtu.be/qAgF9Mzr8XM
>>
>> There is a link for the OpenSCAD (free and easy to use open source
>> modeling software) files in the YouTube description, but here it is as
>> well:
>>
>> https://www.printables.com/model/371698-air-wound-coil-form
>>
>> The coil would have looked better if I had let the superglue cure on its
>> own. Running water over it to speed up the cure made it sort of bubble
>> up and trashed the appearance.
>>
>> 73,
>> Dave AB7E
>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>
>
> --
> Randy Lake N1KWF
> 73 Gunn Rd.
> Keene,NH
>
>
>
--
Randy Lake N1KWF
73 Gunn Rd.
Keene,NH
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|