Towertalk
[Top] [All Lists]

Re: [TowerTalk] Detuning a tower .... was Open-wire transmission line

To: David Gilbert <ab7echo@gmail.com>, towertalk@contesting.com
Subject: Re: [TowerTalk] Detuning a tower .... was Open-wire transmission line
From: "Richard (Rick) Karlquist" <richard@karlquist.com>
Date: Tue, 2 Jan 2024 10:18:38 -0800
List-post: <mailto:towertalk@contesting.com>
If you run a wire down the center of a grounded tower, then the tower functions as a Faraday cage so that the wire is non radiating. It will
still make a dandy shielded transmission line.  If you run a wire
along side the tower but outside the tower, then you get the dual modes,
one radiating and one non-radiating.  Good question though ...

73
Rick N6RK

On 1/2/2024 9:49 AM, David Gilbert wrote:


Hi, Joe.

Detuning a tower and shunt feeding a tower seem to be essentially the same mechanism except for whether there is a feed or not, and I've often wondered why running a wire down the center of a tower wouldn't create the same coaxial section as surrounding the tower with multiple wires. Has anyone successfully tried this?  I couldn't find much of anything by searching online.

Take care es 73,
Dave  AB7E


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>