Re: [TowerTalk] Sealing coax connections

[n4zkf n4zkf.com <n4zkf@n4zkf.com>]

That’s why we use drip loops as well.

Dave n4zkf

From: TowerTalk <towertalk-bounces@contesting.com> on behalf of jcjacobsen via 
TowerTalk <towertalk@contesting.com>
Date: Tuesday, April 22, 2025 at 1:04 PM
To: towertalk@contesting.com <towertalk@contesting.com>
Subject: Re: [TowerTalk] Sealing coax connections
I can't believe no one has brought up these 2:


1. I've done the first wrap with scotch 33/88 BUT with sticky side out and over 
lapped. It's a little tricky but can be done. Then over wrap with 33/88, 
overlapping down the coax on each end. If you're picky, do another wrap over.


2. IF the connector is on a vertical run the final wrapping should be done 
going in an upward direction. That way there is no ridge to catch rain and 
allow it to seep in.


Just my $.02.


73
K9WN  Jake
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk