Towertalk
[Top] [All Lists]

Re: [TowerTalk] Good vacation antenna

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Good vacation antenna
From: Jim Brown <jim@audiosystemsgroup.com>
Reply-to: jim@audiosystemsgroup.com
Date: Fri, 4 Jul 2025 11:30:11 -0700
List-post: <mailto:towertalk@contesting.com>
On 7/4/2025 8:39 AM, Wes wrote:
I "built" a model of a vertical in AutoEZ and used EZNEC Pro/2+ V 7.0 running the NEC 5 engine to do the computations.

All good, but -- one of the things that long QEX piece showed is that EZNEC doesn't correctly model inductive loading! They did this by comparing the modeling result with measurements of built antennas.

73, Jim K9YC

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>