[Top] [All Lists]

[VHFcontesting] FT-736 and contest logging software?

To: <vhfcontesting@contesting.com>
Subject: [VHFcontesting] FT-736 and contest logging software?
From: k9mk@flash.net (Mike Krzystyniak)
Date: Thu Jun 19 16:44:02 2003
I wish someone would do something with the FT-736r.

It seems that;  http://www.kingsmith-software.com/  thinks they can...

Mike  K9MK


-----Original Message-----
From: vhfcontesting-admin@contesting.com
[mailto:vhfcontesting-admin@contesting.com]On Behalf Of Tree N6TR
Sent: Tuesday, March 05, 2002 4:21 PM
To: kharker@cs.utexas.edu; VE2ZP@rac.ca
Cc: OntVHFAssoc_reflector@yahoogroups.com; vhfcontesting@contesting.com
Subject: Re: [VHFcontesting] FT-736 and contest logging software?

> On Tue, Mar 05, 2002 at 04:33:21PM -0500, Dave wrote:
> > Is there contest logging software that supports the Yaesu
> > FT-736R?  I've tried CT and NA, neither of which overtly
> > supports the '736.  I've tried setting these programs up
> > with the other Yaesu rigs they support, but I've had no
> > luck.  Is there something else out there I should consider?
> >From what I've heard from N6TR (author of TR) the Yaesu FT-736R's
> computer interface is basically useless.
> As near as I can tell, almost every single Yaesu radio with a computer
> interface uses a different command set from the others.  It's like the
> engineering groups that work on each radio never talk to one another
> to standardize on a common way to do things.  The FT-847, for example,
> did not work with TR Log when it first came out, and didn't work until
> Tree was able to find time to add the model specific differences to the
> program.

Furthurmore - the older Yaesu's didn't have a command set that would
really enable support from a logging program.  I will check, but I
believe the 736r only allows control from the port and has not way to
respond to commands asking for frequency.

Tree N6TR (who has a 736r and wishes I could do something with its
VHFcontesting mailing list

<Prev in Thread] Current Thread [Next in Thread>