> On Tue, Apr 12, 2005 at 01:48:34PM -0400, David Martin wrote:
> > Looking at the specs from several Bias Tee manufacturers, I am puzzled
> > by the "Return Loss" spec. Does anyone know what this refers to???
> > This is typically a pretty high number 10 -> 30 db.
>
> The amount of power reflected from either the input or output. The higher
> the number - the closer to a 1:1 SWR you are seeing.
I still don't have it.
You mean power reflected across the T or from the T. If it is from the
T then wouldn't that be bad? If it is across the T the wouldn't 10 ->
30db be bad also?
--
David L. Martin
w0snj@arrl.net
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|