Yes, and if you want to use a TS-850 as a transverter IF, get Steve's
TIB850. The rig is hard to tame as a transverter IF, but easy with that
interface kit. AND you can still use the radio on HF!
73, Zack W9SZ
On Wed, 28 Dec 2005, wbr wf4r wrote:
> Ray J,
> The best thing in the world to keep from over driving a transverter
> is to use the DEMI Tranverter Interface Board. I finally learned my leason
> and invested in the kit while at the SVHFS Conference this year. It works
> by applying a fixed ALC voltage to the IF rig to keep its power output
> minimal. The DEMI transverters are very sensitive to drive in that they
> take very little to drive it to full output. The DEMI TIB is a very
> inexpensive investment and it will pretty much garrantee that you will not
> put too much power into your transverter. I seem to recall that I only paid
> $20 for the kit. Worth every penny!
> 73,
> Bill,
> WF4R
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|