Although I did use a 3 element 6 meter beam on 2 meters during an Aurora in
2001. Worked from EN41 to EM58.
73s John NE0P
---------- Original Message ----------------------------------
From: "Mike (KA5CVH) Urich" <ka5cvh@gmail.com>
Date: Thu, 13 Apr 2006 16:58:01 -0500
>On 4/13/06, jon jones <n0jk@hotmail.com> wrote:
>
>> So a simple 6M antenna can work on 2M in a pinch and is capable of read DX.
>> I also think this 2M TEP QSO shows how strong propagation can be via this
>> mode and PY5CC's station and operating skill were a factor.
>
>Mike wrote
>
>But this was a quad and not a Yagi ! Like others have commented, and
>I too have heard, (but never tested personally), that 3/2 wave center
>fed yagi's will perform poorly.
>
>--
>Mike Urich, KA5CVH
>http://ka5cvh.com
>Amateur radio ~is~ a contact sport
>
>http://ka5cvh.com/democ.htm
>_______________________________________________
>VHFcontesting mailing list
>VHFcontesting@contesting.com
>http://lists.contesting.com/mailman/listinfo/vhfcontesting
>
________________________________________________________________
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|