you can get the ppt signal form the hf data I/O jack/**//**//
<http://www.packetradio.com/bbb/CBL%203.gif>**/ or from the STBY port..
Which band transvertser are you planning on? 10 meter in or 2 meter in..
you run the ptt from the radio to the tib&the transverter. or you can
use the aux relay on the tib to key the transverter..
Be very careful setting tib alc level (if its not done already) ..
and make sure the alc and line can not become disconnected from the
radio/tib or you will probably let some of the precious smoke out of the
transverter, when you tx alot more power into the transverter than you
really wanted want to...
Ray J
W9RAY
50-2304mhz
EN44gt
http://www.w9ray.org
>Subject: [VHFcontesting] need advice/ft-847 and demi transverters
>
>Hello
> Has anyone used a yaesu ft-847 with a demi transverter? I need
>advice on how to key the transverter. I am using a TIB interface between
>the transverter and the if rig(ft-847).
>
>Thanks and 73 and Good Dx
>
>Bill af4od em72
>
>
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|
