----- Original Message -----
From: "John Lindholm" <w1xx@cox.net>
To: <WB4UNA@aol.com>
Sent: Saturday, January 13, 2007 6:15 PM
Subject: Re: [VHFcontesting] help on 6155
> WB4UNA:
>
> I haven't used mine in a couple years....but I doubt I moved it since.
> Mine is set at 00064....and I remember that all the tuning controls were
> pretty broad....and not terribly critical. I used to get 400 watts out.
> Good luck. 73!!
>
> -- John, W1XX
> ----- Original Message -----
> From: <WB4UNA@aol.com>
> To: <VHFcontesting@contesting.com>
> Sent: Saturday, January 13, 2007 3:44 PM
> Subject: [VHFcontesting] help on 6155
>
>
>>
>>
>> just got the conversion done on this amp to 222. I am having a problem
>> finding the sweet spot on the output tuning inductor. If someone has one
>> of these
>> and can give me a idea where to start on the dial I would be so
>> greatful...
>>
>> thanks Randy
>>
>> WB4UNA since 1970
>> Carlus M. Randy Chavis
>> 247 Goff Court
>> West Columbia
>> SC 29172
>>
>>
>> BANDS : SSB,CW
>> 10-160,6,2,432,220
>> EM93KV
>>
>>
>>
>>
>> _______________________________________________
>> VHFcontesting mailing list
>> VHFcontesting@contesting.com
>> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>>
>
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|