Wow! My in-box is filled with responses to my earlier question about T/R
switching for my 1296mhz amp. I'm printing them all out and studying them now.
The common theme was that I needed to get relays for the purpose.
As luck would have it, local VHF guru, Jimmy Long, W4ZRZ has given me two
boxed, like new Coaxial Relays. These are model CX-520D type. They have type
"N" connectors, and work from 12VDC. I found the following fax sheet on the web
about these.
http://www.nts-electronic.com/cx520d.htm
So, I assume these would work for my application? I'd like to use the pre-amp
at the antenna, but it's the Icom model, which requires 12VDC through the coax.
I should have mentioned that earlier.
Given the new information, I'd appreciate any updates on how this might alter
anyone's earlier recommendations. Again, I can't express how grateful I am for
all the help and encouragement.
73,
Les Rayburn, N1LF
EM63nf
Les Rayburn, director
High Noon Film
100 Centerview Drive Suite 111
Birmingham, AL 35216-3748
205.824.8930
205.824.8960 fax
205.253.4867 cell
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|