VHFcontesting
[Top] [All Lists]

Re: [VHFcontesting] N1MM Frequency override?

To: wa4pgm@embarqmail.com, VHF Contest Reflector <vhfcontesting@contesting.com>
Subject: Re: [VHFcontesting] N1MM Frequency override?
From: Barry Pfeil <barrypfeil@gmail.com>
Date: Sat, 13 Sep 2014 13:21:45 -0400
List-post: <vhfcontesting@contesting.com">mailto:vhfcontesting@contesting.com>
Thanks all for the suggestions.  Switchjing to manual seems to be the
easiest option (although I liked the SO2R suggestion) and CTRL-UP/DN then
works perfectly to switch between bands.

73 ES GL in the contest,
Barry K6RM

On Sat, Sep 13, 2014 at 11:49 AM, Kyle Chavis <wa4pgm@embarqmail.com> wrote:

> Turn the rig control off is the only way it's going to work. Then you can
> type in the frequency of your choice but be sure to do it each time you
> change bands.
> 73 Kyle
>
> On 9/13/2014 11:25 AM, Barry Pfeil wrote:
>
>> I'd like to use my N1MM logger for today's ARRL VHF contest.  Problem is
>> that I have it interfaced only to my Elecraft K3 for 6 meters but I use
>> other rigs for 2M and 70cm.  Is there a way to override the band data from
>> the keyboard on a QSO-by-QSO basis in N1MM?  When I tell N1MM to switch up
>> a band (CTRL-Up) it momentarily shows 144 then switches immediately back
>> to
>> 50 because the radio (K3) can't change.
>>
>> Failing to find a way to override the frequency info, I guess I could just
>> shut down the radio interface.  Maybe I just answered my own question....
>>
>> Any suggestions?
>>
>> Thanks and 73,
>> Barry K6RM FM03
>> _______________________________________________
>> VHFcontesting mailing list
>> VHFcontesting@contesting.com
>> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>>
>>
>
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting

<Prev in Thread] Current Thread [Next in Thread>