No problemo! I do it all the time. Keep the feedline close to the mast and
in line with it to present a low profile.
Dave K1WHS
----- Original Message -----
From: "Mark Spencer" <mark@alignedsolutions.com>
To: <vhfcontesting@contesting.com>
Sent: Saturday, June 27, 2015 2:37 AM
Subject: [VHFcontesting] Vertical masts running thru horizontal yagis
Hi. I'm pondering my likely roving / portable antenna setup for the UHF
contest and am thinking of mounting a 432 yagi below a 1296 loop yagi.
Does any one have any practical experience they can share re running a
metallic 1.5" to 2" mast (plus another feed line) thru a 432 MHz
horizontal yagi. The antenna in question will be the a M2 21 element 432
antenna which would be centre mounted on the mast. The antenna at the top
of the stack will be directive systems 55 element 1296 loop yagi.
I'll probably just try this at home before August but thought I would ask
for comments first. It seems like a lot of metal to run thru the pattern
of the 432 yagi. I'm thinking this is probably not going to work out very
well but it would simplify the station set up. In the past I've just run
one antenna per mast to avoid having to deal with this and I may end up
just running separate masts for 432 and 1296 and forgoing the other bands.
Any comments are welcome.
Regards
Mark S
VE7AFZ
Sent from my iPhone
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|