VHFcontesting
[Top] [All Lists]

Re: [VHFcontesting] [VHF] Yaesu FT991 upgrade

To: vhfcontesting@contesting.com
Subject: Re: [VHFcontesting] [VHF] Yaesu FT991 upgrade
From: Bob K0NR - email list <list@k0nr.com>
Date: Thu, 25 Aug 2016 07:53:11 -0600
List-post: <vhfcontesting@contesting.com">mailto:vhfcontesting@contesting.com>
In case you missed it, the "old" FT-991 is still for sale at a discounted price.

Gigaparts (and others) have it for $959
http://www.gigaparts.com/Product-Lines/HF-6M-VHF-UHF-Radios/Yaesu_FT-991.html

73, Bob K0NR

On 8/25/2016 4:19 AM, Ron Klimas WZ1V wrote:
Just designed and built a band decoder
interface for my FT-991 to add that capability.
4 band-dependent TX ground keying and
4 control outputs for coax relays. Article
forthcoming in September NEWS-Letter.
-73 Ron WZ1V

----- Original Message -----
From: "Allen Oldfield" <aoldfiel@stny.rr.com>
To: <VHFcontesting@contesting.com>
Date: Wed, 24 Aug 2016 17:17:03 -0400
Subject: Re: [VHFcontesting] [VHF] Yaesu FT991 upgrade

It's too bad Yaesu didn't decide to make the FT-991 more like the FT-847
(and its predecessor) and include:

a) Four separate outputs (one each for HF, 6M, 2M and 432MHz) and

b) Four separate "keying" functions for each output

Adding those two features to the FT-991A would make it the ideal radio for
me.  Including the ability to add a Panadapter to the would be.astounding.

73,

Al - W9KXI

FN12ne

Date: Tue, 23 Aug 2016 23:58:41 -0400

From: Jim Worsham <w4kxy@bellsouth.net>

To: John Geiger <af5cc2@gmail.com>

Cc: yaesu reflector <yaesu@mailman.qth.net>,      VHF reflector

       <vhf@w6yx.stanford.edu>,    vhf contesting
<vhfcontesting@contesting.com>

Subject: Re: [VHFcontesting] [VHF] Yaesu FT991 upgrade

Message-ID: <3B40D1D0-C7BD-4704-A9F2-F5BA15C9F5C7@bellsouth.net>

Content-Type: text/plain;   charset=us-ascii

Yeah, I looked at this at the Huntsville hamfest this past weekend.  Very
nice.  I just wish there was a way to put that screen on a larger external
monitor.  There is a lot of stuff on that small screen.

73

Jim, W4KXY

Sent from my iPad

On Aug 23, 2016, at 2:27 PM, John Geiger via VHF <vhf@w6yx.stanford.edu>
wrote:

Yaesu has just upgraded the FT991 to the FT991A which features a real
time bandscope/waterfall-like on the Icom 756 series where the audio
is not muted while the bandscope is going.  So far I think it is the
only HF/VHF/UHF rig to have one. Certainly makes it more attractive in
my
mind.

See:  http://www.universal-radio.com/catalog/hamhf/4991.html
73 John AF5CC
_______________________________________________
VHF mailing list
VHF@w6yx.stanford.edu
https://w6yx.stanford.edu/mailman/listinfo/vhf
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting

_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting


--

--
Bob Witte K0NR
bob@k0nr.com

_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting

<Prev in Thread] Current Thread [Next in Thread>