Hi Marshall...
I am on a non-ham related groups.io reflector, in digest mode, and it offers
both choices at the bottom of each individual message within the digest, so I
don't know why there has to be an either/or situation for the administrator to
set up. It is provided to the reader to choose at Reply time. Maybe it is only
that way in digest mode?
Or maybe a look in the wastebasket for the directions is needed. 😉.
Tom Holmes, N8ZM
-----Original Message-----
From: VHFcontesting <vhfcontesting-bounces+tholmes=woh.rr.com@contesting.com>
On Behalf Of Marshall-K5QE
Sent: Wednesday, July 01, 2020 4:56 PM
To: VHF Contesting <vhfcontesting@contesting.com>
Subject: [VHFcontesting] The 222MHz reflector...
After some chatter about 222 WAS, Jay-N1AV asked if an email reflector
would be helpful. I suppose that I should have acted instantly to
create such a reflector. However, I wanted to see if others thought it
was a good idea. Big Mistake, that. Bill-ND0B created one on groups.io
called 222MHz. Bill believes that the Reply To button should be set to
return every post to the entire group. This is the default of
groups.io, but it is easy to change. My email client has a Reply To
List button if you want to send to everyone. I would suppose that other
email clients have a similar button. Hence, if you want a post to go to
everyone, you need only Reply To List rather than Reply.
This setting has caused me and many others a lot of trouble. Proprietary
information and information / comments that are meant for a single
person are revealed to the entire group. It has happened to most of us,
I feel certain. I do not support FFMA any more because of this problem
and Bill's insistence that "His Way" was the "Only Way".
Bill claims that almost all of the reflectors that he reads have the
Reply To set to Group. I checked and I cannot find a single major VHF
reflector that is set this way. Moon-Net, the VHF Reflector, the
VHFContesting reflector, the Southeast VHF Society Reflector, the
Central States VHF reflector, and the Pacific Northwest VHF Society
reflector all have the Reply To set to Sender, not Group. To me, the
evidence is clear.
I have asked Bill nicely, twice, to change this setting, but he
refuses. Hence I have two paths.
1)I can set up another 222 reflector with the Reply To set to sender OR
2)I can just ignore his group and work on 222 via email.
Both of these have drawbacks. What do 222 operators in general think is
the right approach?
Thanks for your advice....
73 Marshall K5QE
_______________________________________________
VHFcontesting mailing list
<mailto:VHFcontesting@contesting.com> VHFcontesting@contesting.com
<http://lists.contesting.com/mailman/listinfo/vhfcontesting>
http://lists.contesting.com/mailman/listinfo/vhfcontesting
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|