That info is available at www.mouser.com - Do a search on that part number,
then get the pdf file. Marty, I'm sending it to you in a separate email.
---------------------------------
WA9ALS - John
jfleming@shelbynet.net
http://www.qsl.net/wa9als
---------------------------------
----- Original Message -----
From: "Marty Tippin" <martyt@pobox.com>
To: <writelog@contesting.com>; <wf1b-rtty@wf1b.com>
Sent: Saturday, September 02, 2000 12:10 PM
Subject: Opto-Isolator Help
>
> Wondering if anyone can help me figure out the pinouts for an
opto-isloator
> I found in the junk box - several years ago I started to hook it up for a
> CW keying circuit and probably got it to work, but can't remember now how
I
> did it.
>
> The chip has "NTE 3041" on the top of it and I seem to remember it coming
> in a "ECG" carton. Anyone know where I can find the pinout diagram for
this
> beast?
>
> Alternatively, I recall some conversation recently about the 4N33 chip -
> does Radio shack carry those (or a reasonble substitute)?
>
> Thanks
>
> -Marty NW0L
> martyt@pobox.com
>
> -----
> Submissions: mailto:wf1b-rtty@wf1b.com
> Administrative requests: mailto:wf1b-rtty-request@wf1b.com
> WWW: http://www.wf1b.com/
> Questions about RTTY reflector: mailto:owner-wf1b-rtty@wf1b.com
> Questions about RTTY by WF1B: mailto:wf1b@wf1b.com
>
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|