Main machine uses an SGI 1600SW/Number Nine Revolution 4/AGP and an NEC
1500M/Matrox Millennium II/PCI. In this case the computer boots to the PCI,
but Windows starts on the AGP, running Win2K. A second setup has a
Viewsonic 810/Matrox Millennium II PCI and a NEC 5FG/Mztrox G100 AGP. In
this case computer boots to the PCI and Windows starts on the PCI, running
WinMe/Win98/Win95/Win2K. Both work reliably for me. I've done other
combinations in the past, but can't recall exactly what they were.
Keith WB6BIG
> -----Original Message-----
> From: owner-writelog@contesting.com
> [mailto:owner-writelog@contesting.com]On Behalf Of Ed Sleight
> Sent: Friday, November 24, 2000 12:59 PM
> To: writelog@contesting.com
> Subject: Re: [WriteLog] Multiple Monitors
>
>
>
> Good Morning CQWW!!
>
> Several of the guys have been kind enough to suggest just switching the
> monitors in Device Manager. That works just fine, but in my case, my
> main monitor is mounted in a console at head level directly in front of
> me. The other monitor is about a 30 degree shift of the head to the
> left. So that solution doesn't work for me, although for those of you
> who could take it, it is excellent advice.
>
> A couple, including Stan, N3HS reported they had no problem mixing AGP
> and PCI cards. I have tried several, and I can't do it on my machine.
>
> How about those of you who are successfully using the combination
> posting the type cards, especially the AGP you are using.
>
> 73
> Ed
>
> --
> WWW: http://www.writelog.com/
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
>
>
>
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|