WriteLog
[Top] [All Lists]

[WriteLog] AFSK/FSK

To: <writelog@contesting.com>
Subject: [WriteLog] AFSK/FSK
From: kk6t@joneslumber.com (Terry Dunlap)
Date: Tue, 30 Jan 2001 13:54:13 -0800
Thanks Jon K1US and John WA9ALS.  I was on the right track and just
didn't know it.

73 de Terry KK6T




At 08:41 PM 1/30/2001 +0000, you wrote:
>Hi Terry --
> >The obvious choice would be the port setup menu option in Rttyrite.
> >However, since that is also where you specify which COM port is
> >connected to your TNC, this probably isn't correct.
>
>Actually, it is.  Your soundcard is now used instead of your TNC, so you
>just choose "Soundcard FSK" under "TU Type",  then in "Port"  select the COM
>port where your FSK/PTT cabling is connected and away you go. That's
>assuming you've got the right connections made to your rig for FSK/PTT.
>
> >Also, can this setup be used to operate FSK without starting Writelog?
> >I realize I can run Rttyrite independently of Writelog but if I do so,
> >how does Rttyrite know which COM port is being used for PTT?
>
>Yes, you can.  The Port setting in the RttyWrite menu is enough to do it.
>
>73,
>
>Jon     K1US
>
>
>See you on FSK with WL/RttyWrite
>
>
>
>----- Original Message -----
>From: "Terry Dunlap" <kk6t@joneslumber.com>
>To: <writelog@contesting.com>
>Sent: Tuesday, January 30, 2001 20:25 PM
>Subject: [WriteLog] AFSK/FSK
>
>
> >
> > I've been Writelog with AFSK successfully for a couple months now
> > with my soundcard and want to transmit using FSK now.  I have the
> > W1WEF FSK/PTT/CW interface installed on one of my COM ports.
> >
> > I've checked the help file, archives and the K9JY web site but can't
> > seem to pinpoint where I specify which COM port is controlling the
> > FSK.
> >
> > The obvious choice would be the port setup menu option in Rttyrite.
> > However, since that is also where you specify which COM port is
> > connected to your TNC, this probably isn't correct.
> >
> > Also, can this setup be used to operate FSK without starting Writelog?
> > I realize I can run Rttyrite independently of Writelog but if I do so,
> > how does Rttyrite know which COM port is being used for PTT?
> >
> > 73 de Terry KK6T
> >
> >
> > --
> > WWW:                      http://www.writelog.com/
> > Submissions:              writelog@contesting.com
> > Administrative requests:  writelog-REQUEST@contesting.com
> > Problems:                 owner-writelog@contesting.com
> >
> >



--
WWW:                      http://www.writelog.com/
Submissions:              writelog@contesting.com
Administrative requests:  writelog-REQUEST@contesting.com
Problems:                 owner-writelog@contesting.com


<Prev in Thread] Current Thread [Next in Thread>