Ok, that explains it....Tnx Jerry,
Jim
>
> the "Dumb Terminal" mode expects to see the decoded data stream at the
> original signal baud rate - i.e., 45 baud for conventional RTTY. It has
> nothing to do with the pk232. I have used Dumb Terminal mode with older
> TUs. It is pretty easy to get the appropriate signal levels from an old
> st-6, for instance.
>
> Think of the Dumb Terminal mode as the receive equivalent of the FSK
serial
> port transmit output.
>
> Jerry W4UK
>
> At 09:57 AM 3/1/01 -0500, you wrote:
> >SNIP
> > (I don't why the DUMB TERMINAL selection does not work for AUTOBAUD)
> >So, I can replace the batteries in the TU or use Hyper terminal to...
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|