Hello Walt,
Thank you for contacting Microsoft.
The patch you are referring to is labeled a hot fix which means it is
not fully regression tested. To ensure it will resolve your issue, our
support professionals will only release the file to you after they have
determined it will resolve your issue.
To consult with a support professional via the phone to receive the fix,
please contact the appropriate phone number on this page:
http://www.microsoft.com/support/supportnet/overview/overview.asp
To consult with a support professional via email about receiving this
fix, you can submit a standard support issue by sending an e-mail
message to msupport@microsoft.com with the following information:
* Knowledge Base article number you are referencing:
* Product name and version
* Operating system and version # (for example: Windows 98)
* Memory (RAM)
* CPU type and speed
* Error messages (if any)
* Specifics of the problem
* File Name(s), and passwords, as applicable
* Contact information (name, telephone number, e-mail address)
If you have any additional questions, please let us know by replying to
this message.
Thank you,
Judy
Microsoft Online Customer Representative
Does anyone have a copy they can make available? I would pursue it but I
cannot use writelog to control my present rig. I expect to face this
problem once I upgrade to newer equipment.
73,
Walt Flesher, W6SA
w6sa@pacbell.net
-----Original Message-----
From: owner-writelog@contesting.com
[mailto:owner-writelog@contesting.com]On Behalf Of Walt Flesher
Sent: Wednesday, May 23, 2001 1:58 PM
To: writelog@contesting.com
Subject: RE: [WriteLog] DTR high after Windows ME startup
Has anyone gone to Microsoft and actually gotten a copy of the required
file? If your machine came with ME installed, Microsoft wants you to go to
your equipment manufacturer. In my case, Toshiba has nothing about this
problem on their site.
If anyone has the new copy of Serenum.vxd dated 1/17/01, please post it on a
site where it can be accessed by those who need it. If you could attach it
to an e-mail and send it to w6sa@pacbell.net, I will pass a copy on to
Larry, who also needs it.
73,
Walt Flesher, W6SA
-----Original Message-----
From: owner-writelog@contesting.com
[mailto:owner-writelog@contesting.com]On Behalf Of Larry Benko
Sent: Tuesday, May 22, 2001 8:25 AM
To: dx4win@qth.net; writelog@contesting.com
Subject: [WriteLog] DTR high after Windows ME startup
See the following URL for the fix.
http://support.microsoft.com/support/kb/articles/Q285/8/94.ASP?LN=EN-US&SD=g
n&FR=0&qry=serial%20port%20DTR&rnk=2&src=DHCS_MSPSS_gn_SRCH&SPR=WINME
73,
Larry Benko,W0QE
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|