WriteLog
[Top] [All Lists]

[WriteLog] Noise in sound

To: <writelog@contesting.com>
Subject: [WriteLog] Noise in sound
From: gbaron@charter.net (GilBaronW0MN)
Date: Wed, 12 Dec 2001 11:19:17 -0600
> -----Original Message-----
> From: writelog-admin@contesting.com
> [mailto:writelog-admin@contesting.com]On Behalf Of Scot Herrick
> Sent: Wednesday, December 12, 2001 10:35
> To: Writelog; GilBaronW0MN
> Subject: RE: [WriteLog] Noise in sound
>
>
> Hi Gil,
>
> Try closing the Rttyrite window and use the CW Decoder instead found under


Thanks for the reply. You have given me a work around that is satisfactory.
Yes that works although I like the Rttyrite window better. It confirms that
there is a problem with it so I will have to use the CW Decoder.

I did have all else muted, except Wav Level of course which cannot be.

> 'Windows' on the Toolbar. It will decode your CW just fine and on multiple
> channels and might take care of the noise you are hearing.
>
> Also, open your native volume controls on your PC and mute
> everything except
> 'Volume.' Sometimes you will pick up noise using the sound card from the
> 'CD' channel or others because it's not muted.
>
> CU...Scot, K9JY
>
> K9JY's WriteLog User Support Site at:
> http://www.k9jy.com
> mailto:scot@k9jy.com
>
>
> > -----Original Message-----
> > From: writelog-admin@contesting.com
> > [mailto:writelog-admin@contesting.com]On Behalf Of GilBaronW0MN
> > Sent: Wednesday, December 12, 2001 02:54 PM
> > To: Writelog@Contesting. Com
> > Subject: [WriteLog] Noise in sound
> >
> >
> > I was setting up for the 10 meter contest which is both CW and
> > SSB and have
> > discovered a problem that makes it very difficult to use sound.
> > If the Rttyrite window is open then there is a T of noise in the
> > output of a
> > wave file that was previously recorded with no noise. If I shut
> > the Rttyrite
> > window then it is quiet. This means that I have to set up for
> CW if I want
> > the CW decoding every tie I switch from SSB to CW and close and
> > readjust the
> > SSB windows when switching from CW to SSB.
> >
> > Has anyone noticed this problem and found a solution. I tried
> > over and over
> > with various configurations and cannot get rid of the noise.
> >
> > Gil Baron http://webpages.charter.net/gbaron
> > 44:04.925 N 92:30.758 W 1055'
> > "Hierro candente, batir de repente"
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>


<Prev in Thread] Current Thread [Next in Thread>