WriteLog
[Top] [All Lists]

[WriteLog] Telnet Beep

To: <writelog@contesting.com>
Subject: [WriteLog] Telnet Beep
From: w8ik@subich.com (Joe Subich, K4IK)
Date: Sat, 22 Dec 2001 13:54:46 -0500
With most clusters you need to do a "SET/NOBEEP" or whatever the 
appropriate command is for that software.  The cluster is actually 
transmitting a BELL character (a carryover from TTY).  

There is no reason for the bell anyway ... 



> -----Original Message-----
> From: writelog-admin@contesting.com
> [mailto:writelog-admin@contesting.com]On Behalf Of FireBrick
> Sent: Saturday, December 22, 2001 11:44 AM
> To: Al Parsons; writelog@contesting.com
> Subject: Re: [WriteLog] Telnet Beep
> 
> 
> Go to windows, control panel, sounds, and select sound schemes to 'none'.
> ----- Original Message -----
> From: "Al Parsons" <aparsons1@shaw.ca>
> To: <writelog@contesting.com>
> Sent: Saturday, December 22, 2001 9:10 AM
> Subject: [WriteLog] Telnet Beep
> 
> 
> > Hi Guys:
> >
> > I am relatively new to contesting and newer to Writelog.
> > During the Nov Sweepstakes I noticed that every ime a spot came 
> in on the
> Telnet connection, it would announce with a audible tone.
> > If I happened to be transmitting at the time, the tone would get
> transmitted as well.
> > Can anyone tell me how to turn this off?
> >
> > 73,
> > Al, VE6RFM
> >
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> 

<Prev in Thread] Current Thread [Next in Thread>