On Sun, 10 Feb 2002 12:52:30 EST, KG8DH@aol.com wrote:
>I noticed that when I tune the calling station for good print, my
>tones are a little higher, and several times, I've had to call repeatedly
>when working someone.
_________________________________________________________
FWIW, I had this same problem in a TS-850 I used to own. When calling
CQ, stations would come back to me consistently about 100 Hz low.
After lots of time trying to figure out the problem, I came to the
conclusion that the rig just simply transmitted 100 Hz low, but only on
FSK for some reason. CW and SSB were ok. To fix it, I just set the XIT
100 Hz high and ran it that way for years. Worked fine.
I eventually sold the '850 and got an '870. The '870 is right on the
mark (pun intended).
73, Bill W7TI
|