There is also a character limitation of what WriteLog will accept. I forget
what it is, but something like 12 characters. I discovered this by trial
and error when creating a couple of "custom hi msgs for special friends" in
a certain contest - e.g. TE1ST=HI BOB YOU BIG GUN, or something like that.
Callsign=Firstname should be OK, but be careful and test first if you go
longer. I'm sure that it's limited in part because some people don't like
to be slowed down by it at all, receive or transmit, so use sparingly! 73
----- Original Message -----
From: "David P Douglass" <david.douglass@optusnet.com.au>
To: <WriteLog@contesting.com>
Sent: Monday, October 14, 2002 4:01 AM
Subject: [WriteLog] friend.ini
>
> Many thanks for all the replies and suggestions. I've now managed to
create
> my own friend.ini file.
>
> It was a little more tricky than a simple 'find and replace' in Word, as
the
> callsign and name were separated by a 'Tab' and not just 'Spaces'. When I
> went to the find and replace menu and tried to type 'Tab' into the find
box,
> it simply took me to the next box!!
>
> I finally got around it by creating a txt file were the call and name were
> separated by a comma, and then doing the find and replace.
>
> Again, many thanks to all
>
> regards
>
> David, VK2DPD
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
>
|