> Hello,
> Why are ports 5-7 available for rotor control but not for rig control
or cw? I am presently using a Comtrol USB/Serial Hub to add these ports.
Are there plans to add them or am I missing something. Thanks.
> Dave NG6X
You are missing something. The HELP file spells out how to get whatever
ports you want listed as available for CW and Rig control etc: The key part
is below:
There are 4 "slots" available for WriteLog rig interfacing. By default,
CommSlot1 is COM1:, but you can change that by changing the number on the
right of the equal sign.
CommSlot1=1
CommSlot2=2
In this example, the third and fourth slots are on COM7 and COM8. COM15 is
as high as is supported.
CommSlot3=7
CommSlot4=8
Mine looks like this:
[Ports]
COM1:=9600,n,8,1
COM2:=9600,n,8,1
COM3:=9600,n,8,1
COM4:=9600,n,8,1
CommSlot1=1
CommSlot2=4
CommSlot3=5
CommSlot4=6
Thus my Setup Ports window offers COM 1,4,5,6 for rig control.
Hope this helps! 73 - John, WA9ALS
|