>Well,
>I've solved most of my problem with WL sending cw gibberish. I'm new
>using the FT-1000MP and apparently I've got the Jacks wired strangely. I
>found that the computer keys the rig fine if I have the 1000's internal
>keyer turned off. However, then I can't use the paddles (which is
sometimes
>necessary during a contest) unless I switch the keyer back on.
Tom,
That's the way it works (and why I asked if the INTERNAL keyer was on).
What I've done here is used the computer AND an external keyer with
paddles ... into a Y into the MP's rear keying jack.
I've studied the service manual/schematic ... and there's not an easy or
simple way around this without cutting some traces/etc.
73 Billy AA4NU
|