In Writelog, when the WX0B switches the audio to the second radio is there
any way to have writelog automatically switch the entry window to the second
radio at the same time and then switch back when it is done?
-----Original Message-----
From: Ted Demopoulos [mailto:kt1v@demop.com]
Sent: Saturday, November 02, 2002 2:27 PM
To: Ken Widelitz
Cc: Randy Thompson, K5ZD; Richard L. King; writelog@contesting.com
Subject: Re: [WriteLog] Receive Audio Switching
I've used the WX0B with both CT and Writelog. In "Automatic", when the
computer is sending CW, it switches audio to the other radio. When you
send via the keyer, it doesn't (so you can hear what you're sending).
When you switch (via WL or CT) to the second radio, you need to manually
switch the audio on the WX0B to the second radio.
I am no expert in setting it up (or anything else unfortunately), and
spend way too much time before every contest setting up everything! To a
large extent a problem with switching from SO2R to M/S-M/2 to M/2
seemingly every contest :)
73
Ted KT1V ex KR1G
Ken Widelitz wrote:
>The WX0B box, which I have used, does not have a way to handle audio
>switching automatically in WL.
>
>73, Ken, K6LA
>
>_______________________________________________
>WriteLog mailing list
>WriteLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
CONFIDENTIALITY NOTICE: This communication and any attachments are
confidential, and are only for the use of the intended recipient. If
you have received this transmission in error, any disclosure, copying,
distribution or the taking of any action in reliance upon this
communication is strictly prohibited. If you have received this
communication in error, please contact the sender immediately and
delete the original message. Thank you.
|