Hello Users of Writelog,
I have a problem with audio from the microphone in my setup.
I use W98SE, WL v 10.36G.
In Setup/ports I have marked:
COM3 Rig Kenwood (TS-440S) Auto Poll CommPTT=Yes
LPT1 CW
DVK type Sound Board (SB Live/7F in test)
All mode PTT on CW Port RTS checked
CW PTT/Command rig on COM port checked
In CW everything is OK, PTT works fine when sending via Fx or ALT-K.
In SSB, PTT works also OK when sending pre-recorded messages via Fx and the
audio is OK. VOX is off.
But when using the mic from the headset nothing happens, PTT doesn't work.
I have understood that it should.
If I switch VOX on, strange sound emerges from the rig, certainly not
similar to my voice, hi. When I recorded the messages in Fx I used the same
mic.
So, what am I missing? Any help would be appreciated.
73 Erik
Erik Hyllander, SM0LZT
e-mail: sm0lzt@svessa.se
alt.: erik.hyllander@telia.com
Packet: SM0LZT@SK0MK
|