If you are keying the rig using an FSK interface via the accessory jack then
you should use RTTY or FSK. If you are using AFSK via the mic input then
you should use LSB.
Some rigs will allow you to use RTTY/FSK mode with AFSK but most will not
because they mute the mic input.
73,
Zev N2WKS
-----Original Message-----
From: Dennis [mailto:roofus@sbcglobal.net]
Sent: Monday, January 20, 2003 7:30 PM
To: WriteLog@contesting.com
Subject: [WriteLog] RTTY question
Being new to WL, RTTY and contesting in general I have many questions and
try to read as much as I can to answer them be for I ask. Here are 2 I'm
not sure of. 1) My ICOM 775DSP has a RTTY mode setting, 2) My KNWD TS-2000
has a FSK mode. MMTTY says to use LSB. What do I use on my rig to run
RTTY?. If there is a MMTTY reflector I probably should ask the questions
there but I haven't found it yet.
Thanks and 73,
Dennis AB8NI
--- StripMime Report -- processed MIME parts --- multipart/alternative
text/plain (text body -- kept)
text/html
---
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
CONFIDENTIALITY NOTICE: This communication and any attachments are
confidential, and are only for the use of the intended recipient. If
you have received this transmission in error, any disclosure, copying,
distribution or the taking of any action in reliance upon this
communication is strictly prohibited. If you have received this
communication in error, please contact the sender immediately and
delete the original message. Thank you.
|