Wayne,
The most likely issue is that you need to feed audio from your sound card
Line Out to the Patch input on the FT1000mp. You can not use the same AFSK
pin on the Packet connector. It is cut off in SSB mode. Just like the
Microphone is cut off in Packet mode. Either use the Patch input or the
Microphone connector.
The other issue is to make sure that Writelog is in SSB mode also. If you
are hearing the wave files in the speakers then I would guess this is not a
problem.
Jerry, W6IHG
At 10:42 PM 2/25/2003 -0600, Wayne Alexander wrote:
>Well I am trying to get setup for this weekend. I have all of my files in
>place and can push the f keys and hear them sending over the computer
>speakers but can not get anything to the radio. I have the vox on and did
>not help.It works fine for RTTY ,CW but can not get it to work for SSB. I
>think I need to run some different cables to the radio but not sure. Rig
>is a FT1000MP. Computer is a P4 1.8g processors w/256ram and so on. What
>am I doing wrong.
>If you guys need more info just let me know.
>
>Thanks 73,
>
>Wayne
>N?EA
------------------------------------------
Dr. Jerry R. Pixton, PIXOS Designs LLC
http://www.pixos.com/designs/RadioTuner/
jpixton@shentel.net
------------------------------------------
|