You might try keying from a COM port. I had choppy CW on a 950MHz Duron
machine via the LPT port that was fixed by using the COM port.
73,
Andy, G4KNO
Granta CG, M0CAM & M4R
> -----Original Message-----
> I have writelog running on an old laptop p133 using the LPT port
> to send CW to my Ten Tec Omni VI+ -- the problem is the cw
> 'breaks up' (that is not all letters are sent completely) when
> sending messages with the F keys. If I type slowly all letters
> are OK via the keyboard.
>
> I've changed baud rate and about every setting I can in writelog
> to no avail.
>
> Anybody run into this sort of thing? Any clues?
>
> Thanks in advance!
>
> 73 T.E. 'Doc' Drake, W5TB
> Arlington, Texas
|