> That's what I use. Some recommend a 3-4K resistor instead of the 1K
> - won't hurt, might help. 2N2222 is fine. I key CW with DTR on the
> COM port, thru resistor to base of 2n2222. Ground the emitter.
> Emitter and collector to key rig. I think you have it.
You may also replace the transistori with an opto-isolator (4N28 etc).
This way you can get ground isolation between the computer and the
RF equipment.
73 Costas SV1XV
+-----------------------------------------------------------+
| Costas Krallis, SV1XV |
| P.O.Box 3066 |
| GR-10210 Athens TEL/FAX: +30-1-3811362 |
| GREECE E-MAIL: sv1xv@eexi.gr |
+-----------------------------------------------------------+
|