[WriteLog] CW Keying Interface

[k0wa@swbell.net (Lee Buller)]

OK, just need some comfirmation....
 
I decided to build a keying interface for WriteLog, but I cannot find a 4N33 
anywhere.  Radio Shack does not carry them any more.  Really!  I even looked on 
the Web too.

So, I reverted back to previous setup and a different program.  Will this work? 
 Use a 2N2222.  From Serial Port Pin 4 to a 1K resistor to the base of the 
2N2222.  The emitter is hooked to Pin 5 and the collector and emitter are used 
to key the rig.
 
That should work with WriteLog???  Right???
 
Lee - K0WA