RE: [WriteLog] Fw: Re: ARRL announces contest rule changes

[Jerry Pixton <jpixton@shentel.net>]

Gil,

So nice to hear from you again.

If you will look on the Writelog web site you will find the corrected 
namedmul.ini file. Download it and put
it in place of your current one.

You do not need to edit your current file. I am doing this as a service to 
the Writelog users so that
Wayne can spend his time on better things

Have a good day!

Jerry, W6IHG



At 03:31 PM 9/11/2003 -0500, rojomn wrote:
> And pray tell, WHY is this file not posted on the web site? Why do I have to
> find out about this and manually update it? If a person does not use the
> program A LOT and watch for this type of information then he is out of
> date/. It would be SO EASY for Wayne to keep this up to date. Look at the
> way DXLABS updates occur if you wish to see how it should be done.
>
> On top of that the instructions give here are WRONG because I have the
> latest file on the website
> www.writelog.com
> and NW-NWT, VE8=NWT and VY1=NWT are not found. It give me NO confidence that
> any of this instruction is correct.
>
>
> Gil, W0MN http://webpages.charter.net/gbaron
> 44.08N 92.512835W 1050'
> Hierro Candente, Batir de repente
>
> > -----Original Message-----
> > From: writelog-bounces@contesting.com
> > [mailto:writelog-bounces@contesting.com]On Behalf Of k6iii@juno.com
> > Sent: Thursday, September 11, 2003 1:45 PM
> > To: writelog@contesting.com
> > Subject: [WriteLog] Fw: Re: ARRL announces contest rule changes
> >
> >
> > Info re editing WL namedmul.ini file to align with new ARRL section
> > rules.
> > Jerry
> > --------- Forwarded message ----------
> >
> > Jerry,
> >
> > Find your namedmul.ini file. It should be in the same directory ("folder"
> > for you windoze people) as your writelog.exe file and all the other
> > writelog files.
> >
> > Use Notepad to edit this file. Do NOT use WORD or any other editor that
> > can put funky characters into this file.
> >
> > Scroll down the text (or use ctrl-F) until you find
> > [SS]
> >
> > scroll down a little further until you find
> > NWT=VE
> > and change it to
> > NT=VE
> >
> > ALSO (!!!)
> >
> > scroll down further to
> > [SS-ALIAS]
> > which is just below the entry you just changed.
> >
> > find
> > YU=NWT
> > NW=NWT
> > VE8=NWT
> > VY1=NWT
> > and chenge them to
> > YU=NT
> > NW=NT
> > VE8=NT
> > VY1=NT
> > then add
> > NWT=NT
> >
> >
> > delete the entry
> > NT=NTX
> >
> > This allows you to enter VE8 (for example) and the mult name that appears
> > in the log will be NT
> >
> >
> > > Marc,
> > > Can you tell me (and the other reflector readers) how to edit  the
> > > namedmul file to accommodate the ARRL changes?
> > > Jerry Bliss
> > > San Jose, CA
> > >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web:  http://www.writelog.com/
> >
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/

------------------------------------------
Dr. Jerry R. Pixton, PIXOS Designs LLC
http://www.pixos.com/designs/RadioTuner/
jpixton@shentel.net
------------------------------------------


_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/