Well I tried using the automatic system here after upgrading. It worked
fine. As to the "OK" button problem mentioned below, you must select from
the right side box (Location) and as soon as I clicked on my QTH selection,
the "OK" button lit up. I saved it to my 'upload' folder (subdirectory of
Trusted QSLs so I can keep track of which TQ8 files are ready.
I uploaded the TQ8 file to the ARRL LOTW and it worked fine.
WN6K, Paul
----- Original Message -----
From: "Ian White, G3SEK" <G3SEK@ifwtech.co.uk>
To: <writelog@contesting.com>
Sent: Friday, November 14, 2003 08:23
Subject: Re: [WriteLog] Update 10.43F ready for downloading...
> Ron K5DJ wrote:
> >Here are the fixes and list of features:
>
> >5. Create Trusted QSL output for Logbook of the World.
>
> Having successfully uploaded 1600 QSOs to LOTW via WriteLog's ADIF
> output, I was very interested to try the new automatic feature in
> v10.43F.
>
> Two unexpected things happened:
>
> 1. The WL TQSL dialog had already found my existing TQSL certificates,
> without being told where they were on the hard drive. That looked like
> good news, but...
>
> 2. After selecting the correct cert and entering the correct password
> (verified, typed carefully and re-tried several times) the dialog would
> not enable the OK button or allow any further actions. The only way out
> was to Cancel.
>
> Comments, please?
>
> (If it's relevant, I'm using WL's General DXCC Logging module - not the
> world's best non-contest logger, but a good way to learn how to set up
> and use WL.)
>
>
> --
> 73 from Ian G3SEK
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|