John,
I believe that the rig is being keyed for Bob by his having the LPT set for
PTT.
Tony, VE3RZ
----- Original Message -----
From: "WA9ALS - John" <ham_reflectors@wa9als.com>
To: "Bob Naumann - N5NJ" <n5nj@gte.net>; <writelog@contesting.com>
Sent: Sunday, January 25, 2004 11:09 AM
Subject: Re: [WriteLog] RTTY Questions
> > I started rttyrite, and set the port for com4. This is the problem.
This
> does not make rttyrite do ptt on Com4. What I had to do, is leave the
> settings for LPT1 alone, and add that Com4 is a CW port in my Writelog
port
> setup, and contrary to my logic, have no port selected in Rttyrite.
>
> This has to be a Rigblaster issue. I use COM2 for FSK and PTT, and COM2
is
> set in the Rttyrite window. If I chose "None" in the Rttyrite window, my
> rig is not keyed, as expected. My Ports Setup only has settings enabled
for
> rig control (freq/band/QSY).
>
> I don't understand how you get rig keying without selecting a com port in
> the Rttyrite window - unless you are doing that via rig control by
> indicating so in the Port-Setup screen. - John
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|