The * key on the keypad does clear the RIT with my MARK-V, and the %O clears
it in a message buffer.
If I remember correctly, TRLOG would use the shift keys to activate RIT down
or up respectively. Writelog doesn't have that capability (with a Yaesu),
does it?
Jim N7US
----- Original Message -----
From: "Don Hill AA5AU" <aa5au@bellsouth.net>
To: <writelog@contesting.com>
Sent: Wednesday, January 28, 2004 7:45 PM
Subject: RE: [WriteLog] Problem with 10.45 %O command in macro
I don't know this for sure, but perhaps this isn't supported in Icom radios?
Try this. Move your RIT, then hit the * key on the keypad. Does it reset
it to zero?
If not, it doesn't work with your radio.
%O works with Kenwood radios. I beta tested it in both the ARRL RTTY
Roundup and BARTG and it's a timesaving technique for those that use RIT.
Don AA5AU
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com]
On Behalf Of Bill Turner
Sent: Wednesday, January 28, 2004 8:12 PM
To: writelog@contesting.com
Subject: [WriteLog] Problem with 10.45 %O command in macro
The version 10.45 upgrade says:
* Add %O (RIT clear), %L (log the QSO), and %W (wipe the Entry
Window) commands to CW/RTTY/SSB messages.
On my IC-746PRO, the %L and %W work fine, but the %O does not work at all.
Any ideas?
--
Bill, W6WRT
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|