WriteLog
[Top] [All Lists]

[WriteLog] Re: [RTTY] Data conversion Need an extrta port?

To: cq-contest@contesting.com
Subject: [WriteLog] Re: [RTTY] Data conversion Need an extrta port?
From: K4SB <k4sb@earthlink.net>
Date: Thu, 05 Feb 2004 05:15:53 +0000
List-post: <mailto:writelog@contesting.com>
Dave Bernstein wrote:
> While the Windows driver supplied with the FT8U245AM does emulate a
> serial port, you'd need an appropriately-programmed PIC or some other
> embedded microprocessor with a built-in UART to create a PC-accessible
> serial port. That's a little more involved than "you can use an USB port
> as a serial port".

I believe if you read the article again, you will find the author who
built the device determined that Windows solved the problem and
created the port.

I didn't write it, I don't need the ports, so take it as it was sent
or forget it.

73
Ed
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>