This is looking like a Writelog problem as it occurs even when I have the
serial plug to the radio unplugged. Using the DTR to key, with Windows XP and
WL
10.45, I get a constant key down when the program first loads and when I try
to key the on the serial port DTR line (which I am using to key the CW). It
will release when I manually hit the paddles.
Yes, I have the PTT on "no" both in the COMM PTT and the CW PTT. The ports
are configured 9600:8:1:no parity:no flow control. I have tried using com 1
from the serial port and com 4 from a USB to serial adapter. I have tried
controlling both the rig and CW with the same port (which worked before). I
have
tried controlling the rig with one and the CW with the other. I have unplugged
the serial plug from the radio altogether.
I would roll back to an earlier version of WL but they didn't support the
Orion.
All the configurations will follow the rig but all of them give me a steady
key down when I try to use the computer generated keying. All release when I
manually hit the paddles. TUNE will release if I hit the ESC key and then the
manual key.
Any ideas what I am doing wrong?
Radio k4ia
Craig "Buck"
Fredericksburg, Virginia USA
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|