0 and -1 worked before with WriteLog and still works when I open two stand
alone MMTTY windows. Also, at times, when I opened the first RTTYrite
window, the default in MMTTY was set at 0 and I still got the "Can't open
soundcard (0)" message even though the second window was not open.
I've tried other device numbers (1 and 2) for the second window with no
success. The first window was always set to -1. In fact, it takes almost no
time for the computer to figure there is no sound card even remotely
associated with those numbers. The computer thinks awhile before deciding it
can't open soundcard (0).
But, I'll give 0 and 1 a try.
Thanks
Chuck, KE4OAR
W4UK wrote:
> Try 0 and 1. I recently learned -1 always represents the "default" card,
> which in your case may also be card 0 (the same one).
>
> Jerry W4UK
>
> At 16:25 2/27/04, you wrote:
> >While setting up for the NAQP RTTY contest, I have found that WriteLog
with
> >the MMTTY plug-in now won't open the second sound card.
> >
> >It has worked in the past and I can open two windows of MMTTY and each
will
> >operate with it's assigned sound card.
> >
> >With my system, the original sound card is device (-1) in MMTTY and the
> >second sound card is device (0). WriteLog gives me an error that it
cannot
> >open Soundcard (0).
> >
> >Any suggestions on what to look for?
> >
> >Thanks
> >
> >Chuck, KE4OAR
>
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|