WriteLog
[Top] [All Lists]

RE: [WriteLog] Problems with two sound cards and MMTTY plug-in

To: WriteLog Reflector <writelog@contesting.com>
Subject: RE: [WriteLog] Problems with two sound cards and MMTTY plug-in
From: Kurszewski Chad-WCK005 <Chad.Kurszewski@motorola.com>
Date: Fri, 27 Feb 2004 15:32:34 -0600
List-post: <mailto:writelog@contesting.com>
I can open two Rttyrite windows with stereo soundcard AFSK,
change one to MMTTY, everything's fine, but as soon as I
change the Rttyrite window to MMTTY, Rttyrite crashes with the
fatal error, and I'm left with one Rttyrite window (the original
one) and two fully functioning MMTTY windows.  So it's
a problem with the 2nd Rttyrite window, not MMTTY (directly).
It worked properly up to about a week ago when I tried
saving my configuration with both MMTTY windows open and
the restart with RTTY window box checked.  Ever since then,
I can't get two Rttyrite/MMTTY windows open at once.

Chad WE9V

> -----Original Message-----
> From: writelog-bounces@contesting.com 
> [mailto:writelog-bounces@contesting.com] On Behalf Of Chuck Fullgraf
> Sent: Friday, February 27, 2004 3:03 PM
> To: WriteLog Reflector
> Subject: Re: [WriteLog] Problems with two sound cards and 
> MMTTY plug-in
> 
> 
> 
> The second RTTYrite window along with the second MMTTY tuning 
> display stay
> open after starting it.
> 
> When switching TNCs in RTTYrite from Stereo FSK to MMTTY, I 
> get the "This
> program has a fatal error..." type message and the window 
> closes. When I
> open it again it works fine. This happens when switching with 
> each window
> when switching them over to MMTTY.
> 
> As I interrupt WA9ALS' advice, I leave the configuration of 
> WriteLog so that
> it does not open RTTY on start-up. Then start each RTTY 
> window and adjust
> the settings as required. Note, sometimes the second window 
> opens on top of
> the first and they have to be moved apart.
> 
> When I used the two soundcard set-up during the RTTY 
> Round-up, I left the
> computer running when I was not at the radio just to avoid 
> the start-up
> inconveniences.
> 
> Something else I just discovered, I re-set the RTTYrite TNC 
> to Stereo FSK on
> both RTTYrite windows and the program was using the second 
> soundcard that it
> could not open as soundcard (0).
> 
> Any more suggestions?
> 
> Thanks
> 
> Chuck, KE4OAR
> 
> 
> WE9V Wrote:
> 
> > A couple of us are having similar problems but do not have 
> solutions.
> >
> > When you try to open the 2nd RTTY window (rttyrite with MMTTY),
> > does the RTTYrite window stay open, or does it complain about
> > rttyrite with a windows pop-up message?  My 2nd MMTTY window
> > opens, but can't get a second RTTYrite window open without it
> > crashing.
> >
> > Jim/W7EJ, have you fixed your problem yet?  If so, what was the fix?
> >
> > Chad WE9V
> >
> > > -----Original Message-----
> >
> > > While setting up for the NAQP RTTY contest, I have found that
> > > WriteLog with
> > > the MMTTY plug-in now won't open the second sound card.
> > >
> > > It has worked in the past and I can open two windows of MMTTY
> > > and each will
> > > operate with it's assigned sound card.
> > >
> > > With my system, the original sound card is device (-1) in
> > > MMTTY and the
> > > second sound card is device (0). WriteLog gives me an error
> > > that it cannot
> > > open Soundcard (0).
> > >
> > > Any suggestions on what to look for?
> > >
> > > Thanks
> > >
> > > Chuck, KE4OAR
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web:  http://www.writelog.com/
> >
> 
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
> 
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>