You have me confused. You have Ver 10.46 (I assume you mean 10.46G) and you
are trying to update it with an older version Ver 10.38? What am I missing?
73,
Art
W2NRA
> I am attempting to update Ver 10.46 with update file (WL1038UPG) but
> continue to get a ComponentMoveData error. I am aware of the notice on
> the Support web page:
>
>
>
>
> WriteLog installer gives ComponentMovedata error
> ..and gives an error message naming atl.dll. The problem is that the file
> atl.dll is marked Read-only. Using the Windows File Manager, browse to the
> directory named in the error message and find the file atl.dll. Click on
> the file to highlight it, then right click and choose Properties in the
> menu that pops up. Find the button labeled "Read-only" and be sure the
> button is off. Click OK, and re-run the WriteLog installer.
>
>
> I have checked the file attribute status on every instance of atl.dll and
> all none are marked "read only". I even went so far as to mark them read
> only and then unmark them. No change. I am running WL on WinXP Pro if
> that makes any difference. I have also tried the WL1037UPG update file
> with the same results. The error screen output is as follows:
>
> ComponentMoveDataError
> Media Name: Media
> Error Number -132 (Refer to Online Help)
>
> I would appreciate it if anyone can offer some insight to this problem.
>
> 73 de W0AW
>
> Gary
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|