Re: [WriteLog] Problems with CW keying

["Magnus A" <sm6wet@telia.com>]

Thank you Robert!

That was half way there!
I did not have the internal keyer in use allthough I did use the front jack 
for CW, should have used the back jack for CW and have the button bk-in 
engaged.

Thank you

73 Magnus SM6WET/8S6T
----- Original Message ----- 
From: "Bruce Meier" <n1ln@consolidated.net>
To: "Magnus A" <sm6wet@telia.com>
Sent: Monday, November 08, 2004 7:05 PM
Subject: Re: [WriteLog] Problems with CW keying


> I think what you are trying to do is use the internal keyer in the FT920 
> for
> paddle sending and also the computer for memory / computer sending.
>
> That will NOT work.  The Yaesu keyer circuit is in series with the 
> external
> key jack.  When the keyer is on the computer keying and the internal keyer
> keying both don't work.  What I do with my FT1000MPs is this.  I have a
> Y-connector plugged into the key input jack on the back of the MP.  One
> input is from the computer and the other input is from an external keyer.
> The internal keyer is OFF.    That way the computer sends memory keying 
> and
> when I need to use the paddle - also fine.
>
> Hope I helped.
>
> 73,
> Bruce - N1LN
>
>
> ----- Original Message -----
> From: "Magnus A" <sm6wet@telia.com>
> To: <writelog@contesting.com>
> Sent: Monday, November 08, 2004 12:40
> Subject: [WriteLog] Problems with CW keying
>
>
> > Hello!
> >
> > I am not sure if anyone has had this problem before, searched for it but
> no.
> > I just got a interface hooked up on com port 1 and into my key jack at my
> > ft-920.
> > I got ports settings set as following:
> >
> > com1    X under CW        ft-920    baud rate auto,    checked poll, comm
> > PTT YES
> > com2                                ft-920    baud rate auto,    checked
> > poll, comm PTT YES
> >
> > checked all mode PTTon CW ports
> >
> > CW keyer type is "PC generates"
> >
> > What happens?
> >
> > Well, when I am not having vox in use my keyer works great and I can hear
> > flawless morse but the ft-920 uis built that one needs vox pushed in to
> > transmit code so when I press vox all I get is a tone that never ends, 
> > not
> > even if I unpress vox, i actually have to pull the cable out of the jack.
> >
> > please anyone help me.
> >
> > 73 Magnus SM6WET
> >
> >
> >
> > ---
> > Outgoing mail is certified Virus Free.
> > Checked by AVG anti-virus system (http://www.grisoft.com).
> > Version: 6.0.783 / Virus Database: 529 - Release Date: 2004-10-25
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web:  http://www.writelog.com/


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.783 / Virus Database: 529 - Release Date: 2004-10-25 

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/