I would like to renew this thread to see if we can come up with a
solution. Again it was a frustrating weekend having to click twice,
three, four times or more to get a spot to move to the entry window.
Sometimes the spot would move to the entry window but the entry window
would not be the active area so it would take another click or two.
One thing that seemed to help a little (I emphasize little) was
changing the comm ptt to NO on the radio.
I am able to use DX Labs suite of programs and select band spots
without any problem so I do not think it is a radio or computer
problem. It may be a set up problem of some sort but it sure is
annoying.
One last clue and this has existed for some time. After transmitting
about 90% of the time there is a "No Rig" displayed for a brief moment
and then the correct frequency is displayed. This has been going on
for many revisions.
I have to believe there is some sort of polling problem and sure could
use some help on this.
Thanks to all.
Dick W7ZR
On Mon, 29 Nov 2004 18:27:31 -0600, George Skoubis
<george.skoubis@verizon.net> wrote:
> Dick,
>
> Do you have the setting on the IC-775 line (in the ports menu) set to
> sync?
>
> Try that and see if it works. It may be a communications problem
> where the PW-1 / IC-775 / Writelog are trying to use the comm bus at the
> same time and there are collisions. I think sync tells Writelog to
> wait until the channel is clear until it sends its command.
>
> Wayne explained the sync setting a few years ago but I've forgotten
> since!
>
> Let me know if this helps.
>
> Thanks,
>
> George / KF9YR
>
>
>
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com] On Behalf Of Richard Zalewski
> Sent: Monday, November 29, 2004 10:06 AM
> To: Writelog
> Subject: [WriteLog] Writelog-CT17-Radios
>
> This is the first time I have had a problem with this and looking for
> some advice. I use Writelog (Latest version) with an IC-775DSP and a
> PW-1. What I experienced all weekend in WW was when I clicked on a
> spot I had to do multiple clicks before it would put the spot in the
> entry window and change the frequency on the radio. What I noticed on
> the band map was that the frequency would change immediately and then
> just as fast go back to the original frequency. I would have to click
> many times to get this to work. I then tried it with the PW-1 off and
> that seemed to fix the problem. Frequency changes were immediate.
> So, have I a bad CT-17? I don't think so. I changed the ports around
> and it made no difference. Any ideas, help, or incouragement would be
> appreciated. Note-this had worked before in multi-band contests and
> this weekend I was single band.
>
> Dick W7ZR
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
> ---
> Incoming mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.802 / Virus Database: 545 - Release Date: 11/26/2004
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.802 / Virus Database: 545 - Release Date: 11/26/2004
>
>
--
Tnx es 73
Dick W7ZR
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|