Don't know if you are setting up for RTTY decode only or AFSK & decode or
SSB....?
I use FSK for TX, so I just added an external USB audio box so I could have
another MMTY decoder for the 2nd rig without doing the more complex L/R input
thing.
Quick setup with no extra drivers, & cheap (~$39). Mine is an off-brand, and I
don't think it scored that well on the soundboard check, but since i'm only
using it to RX it doesn't really matter. My guess is that it doesn't do full
duplex.
Here's an example:
http://www.creative.com/products/product.asp?category=1&subcategory=204&product=9103
73,
Blake N4GI
----- Original Message -----
From: Steve Forst <kw3a@snip.net>
Date: Friday, January 28, 2005 11:58 am
Subject: [WriteLog] 2 sound cards not working
> I know this isn't a Writelog problem, but i've seen a number of
> posts here
> about running 2 sound cards.
>
> The Turtle Beach Santa Cruz card works fine, but the on board ac97
> sound
> isn't recognized. Device manager shows a yellow dot with
> exclaimation point
> and tells me it can't start due to a code 10 error.
>
> If I pull the Santa Cruz out of the slot and reboot, the ac97
> works fine.
> Put it back in and the Santa Cruz works but no ac97. I've tried
> uninstalling and reinstalling the ac97, but same results.
>
> Windows XP and HP Pavillion desktop pc. No more open slots to install
> another soundcard and forget the ac97. Any Ideas?
>
> Tnx, Steve KW3A
> kw3a@snip.net
>
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|